Welcome to Eric Deanis 2nd page for engineering

The skills I learned in this drawing were the basic skills of the program which are obviously required to drawing any thing else. The skills could be applied in the real world in a variety of ways to design most any mechanical device. In this assignment I surprisingly did not run into any problems. In this design I was successful because I built it correctly because of the video.

M&M COOKIE.png
_
Freddy jr.png
The difference between this drawing and the last drawing I did is that I used relative coordinates instead of exact coordinates. The skill I learned by doing this drawing was the relative coordinate skill, which will help me in drawings that I do not know the coordinates but know how many I need to go up. I think the skill could be applied in real life for adding to the height of a object such as a house. In this assignment I surprisingly did not run into any problems. In this design I was successful because I built it correctly because of the video.
_
The difference between this drawing and the last drawing I did is that I used angles instead of relative coordinates. The skill I learned by doing this drawing was again the angles skill, which will help me in future drawings that require exact angles. I think that the tool could be used in the real world on things that require precise angles such as gears.The only problem I ran into was the angles messing up even tho I entered them correctly, which I easily fixed by redoing it and losing my place on the angles. I was successful in the aspect that I correctly followed the instruction and it came out correct, and I can continue to be successful by continuing following the directions.
falicorn 3.png
falicorn2.png

falicorn4.png

Falicorn 1.png

Twirlgiger.png
The difference between this drawing and the last drawing I did is that in this one I used the trim tool, parallel tool thing and many others. The skill I learned by doing this drawing was the parallel tool, arch tool, tool options, guide lines, circles, and trim tool which will help me in future drawings because I am going to need to use at least one of those skills in another project. I think that the tools could be used in the real world on many things such as things that require curved edges or even furniture.The only problem I ran into was the lack of midpoint which I easily with Mr.Bailey’s help. I was successful in the aspect that I correctly followed the instruction and it came out correct, and I can continue to be successful by continuing following the directions and learned new things about the program.

The difference between this drawing and the last drawing is that in this one I used the mirror tool, and new type of measuring and had to figure out some of the measurements on my own compared to the last drawing that we got the directions for. The skills I learned by doing this drawing was the mirror tool, line types and measurement types that will help me make more detailed designs. I think that the tools could be used in the real world on many things such as guides more metal tools so the machinist can follow the design better. In this design I amazingly did not run into any problems. I was successful in the aspect that I correctly created the stamp and it came out correct, and I can continue to be successful by continuing to learn the skills and create the designs correctly.

UFO stamper.png

why W?.png
The difference between this drawing and the last drawing is that in this one it was a review of all the tools I had learned. Their were no skills I learned by doing this drawing because it was a review. I think that the tools could be used in the real world on many things such as a guide for the old metal letter signs. In this design I amazingly did not run into any problems. I was successful in the aspect that I correctly created the stamp and it came out correct, and I can continue to be successful by continuing to use the skills and create the designs correctly.

The difference between this drawing and the last drawing is that in this one we designed our own item, a symbol for a business. The skills I learned were the copy tool, rotate tool, move tool, dimension tool, and ellipse tool all of which are tools I will most likely use later to make shapes and such. I think that the tools could be used in the real world on many things such as a guide for making metal badges. In this design I amazingly did not run into any problems other than Google Chrome wasn’t working well and I couldn’t check how to copy shapes. I was successful in the aspect that I correctly created the symbols and I can continue to be successful by continuing to use and learn the skills to create new things correctly.


super adam.png

hand syboler.png
The difference between this drawing and the last drawing is that in this one we used a blueprint to make the object. The skills I learned were the rectangle tool, offset tool and a variation of the arch tool and how to read a blue print which will be needed in our later designs. I think that the tools could be used in the real world on many things such as for one to make a slote plate and other industrial things. In this design I amazingly did not run into any problems in the slightest. I was successful in the aspect that I correctly created the slote plate and I can continue to be successful by continuing to use and learn the skills to create new things correctly.

Sloth plate 2.png

The difference between what we did in this drawing and the last is we changed the grid mode to make isometric shapes. The skill I learned are so-so I am not sure if we learned them correctly since the shapes came out incorrect therefor I am not certain if these skills will be useful later in the corse. The only way I can think that these skills could be be used for in the real world is to analyze bread for some reason or to make designs of strange shaped loaves of bread. The only problem I ran into was the shapes being more elongated then in the guide pictures and was insolvable. In this project I am not sure I was very successful since the shapes became too elongated.
???????????.png

One obvious difference between the cube and the last assignment was this one was created correctly and we could learn something other than how to make 3d bread.

The skills I learned in this assignment were how to use 3d, but spaces in, measure in 3d, change type of view, and how to look/ move around in 3d. The ways the skills will help me later because we will be using 3d in the next assignment and we needed to know how to use 3d to do it. The skills could obviously be applied in real world in a multitude of way such as the obvious, making 3d things such as a Rubics Cube. In this assignment I did not run into any problems that I can think of. I was successful because I created the cube correctly because I followed directions and if I continue to follow directions assuming the directions are correct I will always be successful.
Ruby cube.png
The difference between this assignment and the last is it was much easier and it required using the regular and 3d tools. The only skill learned was how to turn a two dimensional drawing into a three dimensional model.
There are many things that could be made using this skill one of which is a jumbo pencil. In this assignment I surprisingly didn’t run into any problems.
I was successful because I created the frisbee correctly because I followed directions and if I continue to follow directions assuming the directions are correct I will always be successful.
Fried bee.png